civilengineeringstudy

Building Mechanics The Building Mechanics Trades program is designed to teach entry-level, to advanced level skills, primarily in Carpentry, Plumbing & the Electrical trades. Basic Masonry skills are also a part of the curriculum in year three. Students identify, measure, cut, repair and install components relating to residential, commercial and industrial buildings. Student's hands-on experience gives them a significant advantage in obtaining employment in today’s competitive job market.    The curriculum also includes architectural blueprint reading, job safety, job readiness, and job retention skills. Students gain valuable experience using hand & power tools common in the building construction industry. An important part of the instruction includes classroom instruction and the use of related books, videos, manuals and catalogs.  Topics of Study: Personal Safety Speckling & Corner Bead Installation Job Site Safety Soldering Copper Tubing Hand & Power Saw Safet

Warnings and safeguards in rod use. Warnings and safeguards in rod use;  There are various rods available in the market, starting from 5 millimeters to 4, 5, 6, 9, 25 and 25 millimeters. However, there are usually three types of rods used in building construction. Each type of rod is used for piling, slab, beam or column making. If the rod can form a good bond with the concrete, the rod is good. The rods are available in the market upto grade 5, grade 8 and grade 12. The grade 5 rod is rarely used. Usually the grade 5 rod is more used in building construction. Warnings and safeguards in rod use. In case of rod purchase >> The size of the iron rod should be equal in size. >> No cracks or sores. >> Bond is better at deferred bar than plain rod. >> Rusty infected rod does not have to be used without removing the  Technical Issue >> The rod should be mounted at the designated point with the help of GI-wire and cover block. >> Adequate development length

Column welding Column welding When you are a new site engineer at a construction site. Then you have to be a little careful to prevent wastage. Suppose a total of 15 columns are welded to your site today, the size of 20 "x25" and height 8'-3 ". If the height is more than 5'-0", you should cast two lifts. The description of the rod is given in the drawing. The ratio will be (1: 1.5: 3) stone casting, with 100% Sylhet sand. 1. The column kicker comes first in the case of columns. Adjust the column placement with the gridline yarn and insert the kicker. The kicker's mold must be flawless and tight. If possible, insert a ring on the column inside the kicker section. The size of the kicker will be less than 6mm on either side than the original column size. 2. The next day, you can untie the kicker. But don't miss the curating. 3. Call the rod maestro this time and instruct the main rods and rings of the columns to be restrained. Help him tie the rod while